Category Archives: Beadhead

Tying the Brownline Nymph

I’ve only been able to hit the creeks a couple times this year, but I’ve been developing this brownline nymph for the past couple seasons. In particular, I wanted this fly to target a specific river, but I’m finding that it has been producing a ton of resident rainbow trout on all the creeks I’ve fished. The thorax is a split thread loop wrapped like a soft hackle. This gives the fly a jacket of UV dubbing and the appearance of trapped gas. The brown body of the fly is contrasted with chartreuse ribbing and can be seen through the shroud of brown UV ice dubbing. I’ve used tungsten to help get this fly down deep and into the strike zone quickly. It’s a great little bead head fly for the small pocket water creek of the Greater Toronto Area (GTA).

Brownline Nymph fly pattern recipe

Hook: Firehole 516 #12-18 or another jig hook
Bead: Gold tungsten
Thread: Brown UTC 6/0 (140d)
Tail: Pardo CDL fibers
Ribbing: Chartreuse Ultrawire small
Body coat: Bone Dry U.V.
Thorax: Brown Ice Dubbing

The Brownline Nymph fly pattern recipe
The Brownline Nymph fly pattern recipe

Sources

Youtube Channel: Piscator Flies
Web: Piscator Flies
Instagram: piscatorflies
Twitter: piscatorflies
Facebook: piscatorflies

Share

Brass Zebra Bead Head

The Brass Zebra is a mash-up of 2 popular trout flies. The Brassie and the Zebra Midge. This design is credited to Dan Liechty, but there are some other similar flies out in the world.

The fly is quite simple but can be tied using different colors of wire. You’ll just want to make sure you keep the colors contrasting so that you keep the “zebra” effect. Black with gold, silver, orange, or chartreuse all works well.

For the thorax, natural peacock works well, but you can use Ice Dubbing or Diamond Dubbing to give the fly a slightly different look and a little more durability.

Fish this pattern near the bottom of creeks and rivers or it also works well as a stillwater fly suspended under a strike indicator.

Brass Zebra Fly Pattern recipe

Hook: Mustad C49s #10-16
Bead: Gold tungsten or brass
Thread: Black 6/0 (140d)
Body: 1 strand red Ultrawire & 2 strands black Ultrawire
Thorax: Peacock herl or dubbing

Brass Zebra Trout Fly
Brass Zebra fly for trout and panfish

Sources

Youtube Channel: Piscator Flies
Web: Piscator Flies
Instagram: piscatorflies
Twitter: piscatorflies
Facebook: piscatorflies

Share

Tying a Bead Head Flashback Hare’s Ear Nymph

This Bead Head Flashback Hare’s Ear Nymph is a simple variation on the classic Gold Ribbed Hare’s Ear Nymph. The addition of the flashback and the riddance of the shellback make this easy to tie nymph a perfect confidence fl. It is going to be one of the staple flies in my small stream trout box this spring.

For the dubbing, you can either use a premixed hare’s ear dubbing or clip your own from a mask. I’ve clipped mine from a mask and blended the fibers between two pet grooming tools to evenly distribute the underfur and guard hairs.

I’m using the Hedron Mirage Flashabou, but you can use any pearl flash you might have on hand. The Mirage is opal and pearl, giving an almost mirror finish on the back of this nymph.

BH Flashback Hare’s Ear Fly Pattern recipe

Hook: Mustad C49s #10-16
Bead: Gold tungsten or brass
Thread: Olive 8/0 (70d)
Tail: Red squirrel tail
Ribbing: Gold Ultrawire
Flashback: Mirage tinsel
Body: Tan hare dubbing
Thorax: Tan hare dubbing

Flashback Hare's ear Nymph Fly Pattern
Flashback Hare’s ear Nymph Fly Pattern

Sources

Youtube Channel: Piscator Flies
Web: Piscator Flies
Instagram: piscatorflies
Twitter: piscatorflies
Facebook: piscatorflies

Share